Division of Surface Water Proposed Rule - Permit to Install




Proposed Rule

Permit to Install Design Flow and Waste Strength Requirements for Treatment Works Sized For One Hundred Thousand Gallons Per Day or Less (OAC 3745-42-05)


Comment deadline - 5:00 p.m. on January 3, 2012

The originally proposed rule, public notice, fact sheet, and letter to interested parties are available below under "Available documents."


Background

At this time the Agency is soliciting comments on a proposed rule addressing the design flow and waste strength requirements for treatment works sized for one hundred thousand gallons per day or less.  Minor revisions to this rule are proposed to provide additional clarification.  Proposed revisions include: revising the title of the rule to reflect that the rule provides both design flows and waste strengths; including additional information on how flow storage and equalization should be addressed by the rule; rewording the data submittal standards for waste strength characterization; replacing the jpg of table A-1 with the same table A-1, created as an actual table in the rule authoring software; and updating table A-1's information for gas stations/convenience stores.

For more information about Permits to Install and Plan Approvals for Water Pollution Control, visit the Wastewater Permit to Install (PTI) Program web page.


Available documents

Proposed rule
For an amended rule, text being considered for deletion is struck through and new text being considered is underlined. 

  • Proposed Rule 3745-42-05 Design flow and waste strength requirements for treatment works sized for one hundred thousand gallons per day or less. [PDF 1,000K] 


For additional information or to submit comments

Please submit any comments you have on the proposed rule in one of the following manners.

   By e-mail: dsw_rulecomments@epa.state.oh.us
   By mail:   Rule Coordinator
                    Ohio EPA
                    Division of Surface Water
                    P.O. Box 1049
                    Columbus, Ohio 43216-1049
   By fax:       (614) 644-2745

 

If you would like further information about this rulemaking, please contact Dan Kopec at dan.kopec@epa.state.oh.us or (614) 644-1987.


 

* Adobe Acrobat Reader is required to view the [PDF] publications. If you do not have Adobe Acrobat Reader, click here to download it for free.
 

Ohio EPA logo

Contact the Division of Surface Water
Mailing Address: P.O. Box 1049, Columbus, OH 43216-1049
Street Address: 50 West Town Street, Suite 700 Columbus, OH 43215
Phone: (614) 644-2001 ~ Fax: 644-2745 ~ E-mail
Emergency Response Hotline (800) 282-9378