3745-34-58  Reporting requirements.

(A)  The owner or operator of a class I hazardous waste injection well shall
submit a report to the director each calendar quarter, in writing, including:

(1)  The maximum injection pressure; and

(2)  A description of any event that exceeds operating parameters for
annulus pressure or injection pressure as specified in the permit; and

(3)  A description of any event which triggers an alarm or shutdown device
required by rule 3745-34-56 of the Administrative Code and the owner or
operator's response; and

(4)  The total volume of fluid injected; and

(5)  Any change in the annular fluid volume; and

(6)  The physical, chemical and other relevant characteristics of injected
fluids; and

(7)  The results of monitoring required under rule 3745-34-57 of the
Administrative Code.

(B)  The owner or operator of a class I hazardous waste injection well shall
report to the director within thirty days or with the next quarterly report
whichever comes later, the results of:

(1)  Periodic tests of mechanical integrity; and
          
(2)  Any other test of the injection well conducted by the permittee if
required by the director; and

(3)  Any well work over.

(Effective December 16, 1991)