2011 Consumer Confidence Report Data tables.
The following District links take you to Water system CCR Contaminant reports.
- Select your District Office
- Search for your PWS ID by selecting "CRTL - F" and entering your PWS ID
- Highlight and copy the data table for your PWS and Paste it into your Word document
Disclaimer for Table of Detected Contaminants:
The Table of Detected Contaminants provided by Ohio EPA is not intended to be complete or all inclusive. The tables are intended to assist public water systems (PWS) with their data collection and consolidation efforts. PWS will need to verify and add additional information to ensure their Table of Detected Contaminants is complete as required by the Consumer Confidence Rule (CCR). As an example, Lead and Copper 90th percentile values which were less than detection and the total number of lead/copper samples collected and the number of samples that exceeded the AL may need to be added. Also, surface water systems must include turbidity levels and the percent of turbidity levels meeting the standard, TOC, fluoride and total chlorine values, all in accordance with the CCR rule.
Note, these results only include submissions from our certified laboratories, and therefore do not contain any operational data that would be reported on the Monthly Operating Reports.
District Office:
CDO
NEDO
NWDO
SEDO
SWDO
2011 CONSUMER CONFIDENCE REPORT REMINDER
· NEW MAILING ADDRESS- Send both your CCR and CCR Certification Form -
no later than July 1st to:
OEPA Division of Drinking and Ground Waters
Central Office
P.O. Box 1049
Columbus, OH 43216-1049
(Do Not send to the OEPA District Office)
- The CCR Template and Instruction Guide is available at: http://www.epa.ohio.gov/ddagw/pws.aspx
- Your CCR Contaminants Data Table is also available at the website above.
- Prepare and deliver your CCR no later than July 1, 2012.
- There is no new required content for the 2011 CCR.
- Contact OEPA Central District Office at 614-728-3778 if you have any questions.